If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net
Today, mobile phones are an integral part of people’s daily lives and communication. The “Bowhead”, or “battery-anxiety disorder” is seen everywhere. Many people get nervous when the battery on their phone runs low. When the phone is connected, it will be quiet.Few people think about the best way to use chargers, even though we use them every day. Today, gallium-nitride cells are also very common. What is the gallium nitride tech?
1. What is Gallium Nitride (Galium Nitride)?
In this year’s market, gallium nitride has become a popular charging technology. This new technology is being hailed as the ideal charger for the future. GaN is a powerful material, but what exactly is it?
Gallium Nitride is a semiconductor material with large bandgaps. It has the following characteristics: high thermal conductivity; high temperature resistance; radiation resistance; acid and alkali resistant. Early on, it was widely applied in new energy cars, rail transits, smart grids, semiconductor lighting, and new generation mobile communications. It is also known as the third generation semiconductor material. Due to its cost-effectiveness and technological advancement, gallium is used widely in consumer electronics. Chargers are one of these. The bandgap of gallium is wider, and gallium has better conductivity. Chargers using gallium-nitride have higher output efficiency. Gallium nitride charging heads, for instance, can deliver more power at a volume similar to that of an Apple 5W charger.
The birth of gallium-nitride as a new semiconductor is like thunder in the earth. With its advantages, the technological revolution has spread rapidly to 5g, fast charging, RF and other markets.
2. What are the advantages to the GaN chargers
Small volume
Gallium nitride, a new material for semiconductors that can be used to replace germanium or silicon, is an alternative. The power of the chargers has increased from 5v1a to 65W. While the charger’s volume is still acceptable, the contradiction between power output and charger volume is long lasting. Fast charging can also cause a problem with heating. The switch made from gallium-nitride has a higher switching frequency, but it is still a small loss. The high switching rate can reduce the size of the transformer and the capacitor. Therefore, the volume for the GaN-charging head will be smaller.
High power
GaN has a bandgap that is significantly higher than silicon’s, so it can conduct volts for longer. GaN chips have a larger bandgap, meaning that they can conduct higher voltages over time. It is important to not only conserve electricity, but also charge more quickly.
It is easier to adapt to hot environments
GaN semiconductors have a higher thermal conductivity and a wider bandgap compared to the previous two generations. GaN can be used at temperatures over 200°C, is highly reliable, and minimizes the risk of overcharging.
3. Why do we still use the old charging technology?
Why are we still using old charging technologies when the technology of gallium nitride has proven to be so effective? Silicon components are manufactured in a well-established process and cost less than a single part. Because gallium nitride has only recently been commercialized, its production costs are higher than those of silicon.
Moreover, the actual experience is not very good. There is a lot more room for optimization. On the market, gallium-nitride batteries are at least 30 percent more expensive than regular chargers.
(aka. Technology Co. Ltd., a trusted global chemical supplier & manufacture with over 12 year’s experience in providing high-quality nanomaterials and chemicals. Gallium nitride produced by our company is of high purity and fine particle size. Contact us if you need to.
1. What is Gallium Nitride (Galium Nitride)?
In this year’s market, gallium nitride has become a popular charging technology. This new technology is being hailed as the ideal charger for the future. GaN is a powerful material, but what exactly is it?
Gallium Nitride is a semiconductor material with large bandgaps. It has the following characteristics: high thermal conductivity; high temperature resistance; radiation resistance; acid and alkali resistant. Early on, it was widely applied in new energy cars, rail transits, smart grids, semiconductor lighting, and new generation mobile communications. It is also known as the third generation semiconductor material. Due to its cost-effectiveness and technological advancement, gallium is used widely in consumer electronics. Chargers are one of these. The bandgap of gallium is wider, and gallium has better conductivity. Chargers using gallium-nitride have higher output efficiency. Gallium nitride charging heads, for instance, can deliver more power at a volume similar to that of an Apple 5W charger.
The birth of gallium-nitride as a new semiconductor is like thunder in the earth. With its advantages, the technological revolution has spread rapidly to 5g, fast charging, RF and other markets.
2. What are the advantages to the GaN chargers
Small volume
Gallium nitride, a new material for semiconductors that can be used to replace germanium or silicon, is an alternative. The power of the chargers has increased from 5v1a to 65W. While the charger’s volume is still acceptable, the contradiction between power output and charger volume is long lasting. Fast charging can also cause a problem with heating. The switch made from gallium-nitride has a higher switching frequency, but it is still a small loss. The high switching rate can reduce the size of the transformer and the capacitor. Therefore, the volume for the GaN-charging head will be smaller.
GaN has a bandgap that is significantly higher than silicon’s, so it can conduct volts for longer. GaN chips have a larger bandgap, meaning that they can conduct higher voltages over time. It is important to not only conserve electricity, but also charge more quickly.
It is easier to adapt to hot environments
GaN semiconductors have a higher thermal conductivity and a wider bandgap compared to the previous two generations. GaN can be used at temperatures over 200°C, is highly reliable, and minimizes the risk of overcharging.
3. Why do we still use the old charging technology?
Why are we still using old charging technologies when the technology of gallium nitride has proven to be so effective? Silicon components are manufactured in a well-established process and cost less than a single part. Because gallium nitride has only recently been commercialized, its production costs are higher than those of silicon.
Moreover, the actual experience is not very good. There is a lot more room for optimization. On the market, gallium-nitride batteries are at least 30 percent more expensive than regular chargers.
(aka. Technology Co. Ltd., a trusted global chemical supplier & manufacture with over 12 year’s experience in providing high-quality nanomaterials and chemicals. Gallium nitride produced by our company is of high purity and fine particle size. Contact us if you need to.